Aerospace Training
SPARC offers a full range of specialized training by Authenticated 3rd Party AS9100 Auditors
9100 Standard Lead Auditor Course
Approved by PROBITAS-
March 29th to April 2nd, 2027
-
May 10th to 14th, 2027
-
August 30th to September 3rd, 2027
-
October 11th to 15th, 2027
Aerospace Training
9100 STANDARD LEAD AUDITOR COURSE
Probitas Authentication certifies SPARC as meeting the requirements of the IAQG to deliver the following course in support of Aerospace Auditor Authentication: 9100 Standard Lead Auditor Course.
This course materials and the Training Provider’s administrative practices have been verified to be in compliance to the requirements contained in AS9104-3 for Course Delivery and Training Provider Course Administration.
The Online Aerospace Supplier Information System (OASIS) website is managed by the IAQG and used to control Aerospace QMS certifications, 3rd party auditors, and 3rd party audits.
3rd party auditors are authenticated by Probitas Authentication according to the requirements described in the AS9104/3 standard which includes taking the AS9100 Aerospace Auditor Transition Training (AATT) and an AQMS AS9100 Standard Auditor Course.
The SPARC Lead Auditor Managing a 3rd Party Audit Course has been developed considering:
- All AS9100 Rev D Requirements to develop & maintain an Aerospace Quality Management System.
- Exercises to compare AS9100 Rev D Requirements with sample course documents.
- Requirements to perform AS9100 3rd Party Audits acting as a Lead Auditor.
- Exercises to create a Recertification 3rd Party Audit Plan using the AS9104/3 Table 2 & course examples information
- Exercises to develop 3rd Party Audits per AS9100 Rev D Requirements using AS9101 Forms.
- Exercises to determine if course scenarios conform with specific AS9100 Rev D Requirements
- Exercises to generate NCRs using course scenarios and AS9101 NCR Form 4
- AS9104/3 Requirements for Aerospace Experience Auditor Authentication and Reauthentication.
AS9100 Internal Auditor Course
Approved by PROBITAS-
March 29th to 31st, 2027
-
May 10th to 12th, 2027
-
August 30th to September 1st, 2027
-
October 11th to 13th, 2027
Aerospace Training
AS9100 INTERNAL AUDITOR COURSE
The AS13100 standard, issued in March 2021, applies to Aerospace Engine Suppliers. It recommends that “training to be delivered by external body, (recommend using a training provider that utilizes Aerospace Experienced Auditor, minimun 2 days, and contains audit methods and 9100) or by an approved internal Lead Auditor.
Every 3 years, auditors shall have refresher training on Audit methods, nonconformance report (NCR) writing, and report writing.
Auditors should have refresher training on AS9100, as required (e.g., new revision being published)”.
The SPARC Internal Auditor Course has been developed considering:
- Aerospace Industry Regulations
- Internal auditor competence and responsibilities.
- ISO19011 requirements to develop QMS internal audits.
- IAQG ICOP Aerospace scheme to perform 3rd party audits.
- AS9100 Rev D requirements to implement an Aerospace QMS.
- Exercises to compare AS9100 Rev D requirements with Sample course documents
- Exercises to perform internal audit exercises using sample course documents.
- Exercises to elaborate NCRs using sample course documents.
- Exercises to identify if course sample NCRs and responses are properly written.
- Exercises to suggest proper NCR descriptions and responses.
Aerospace Training
AS9100 LEAD AUDITOR MANAGING AN INTERNAL AUDIT PROGRAM COURSE
The AS13100 standard, issued in March 2021, applies to Aerospace Engine Suppliers. It recommends that “Lead Auditor Qualification is required for auditors that will be leading Internal and/or supplier audits. The Lead Auditor shall be trained in an Aerospace Lead Auditor training with documented content and examination. Training preferably delivered by external body with a certified training adequate for the organizations´certification level.
Every 3 years, auditors shall have refresher training on Audit methods, nonconformance report (NCR) writing, and report writing.
Auditors should have refresher training on AS9100, as required (e.g., new revision being published)”.
The SPARC Lead Auditor Managing an Internal Auditor Program Course has been developed considering:
- Aerospace Industry Regulations
- ISO19011 requirements to develop QMS internal audits and to manage QMS internal audits.
- IAQG ICOP Aerospace scheme to perform 3rd party audits.
- AS9100 Rev D requirements to implement an Aerospace QMS.
- Exercises to compare AS9100 Rev D requirements with Sample course documents.
- Exercises to perform internal audit exercises using sample course documents.
- Exercises to elaborate NCRs using sample course documents.
- Exercises to identify if course sample NCRs & responses are properly written.
- Exercises to suggest proper NCR descriptions and responses.
- Lead Program Representative and Audit Team Leader competence and responsibilities.
- Exercises to identify audits risks when developing an internal audit program and establish mitigation actions.
- Exercises to develop an internal audit program considering QMS, production, process, and special process audits.
- Exercises to develop an internal audit program considering QMS, production, process, and special process audits.
- Exercises to review an internal audit program and identify opportunities for improvement.
- Exercises to develop an audit plan for an internal QMS audit.
- Exercises to prepare opening and closing meeting presentations.
- Exercises to prepare and review an audit report.
Aerospace Training
Problem-Solving 8Ds Methodology Course
The most common, popular & effective problem-solving technique is the 8Ds. It applies to all fields of industry; however, each field specifies specific requirements. In the aerospace industry, SAE International has issued standards and reference manuals to support organizations to provide an appropriate and effective method to develop 8Ds including the identification of root cause analysis and corrective actions.
9100 and AS13100 Standards provide QMS requirements related to the basic steps to follow when nonconformities are identified.
Additionally, RM13000 Reference Manual describes the customer requirements regarding the use of 8Ds Problem-Solving Method when responding customer complaints (escapes). These requirements include training requirements contained in Appendix B 8D Training syllabus. Suppliers must develop and implement a documented solving process within its own quality system which meets the requirements of this standard (including training & competence requirements).
The SPARC Problem-Solving 8Ds Methodology Course has been developed considering:
- All 9100, AS13100, and RM13000 requirements.
- RM1300 Appendix B Training Syllabus requirements.
- Exercises to compare all requirements with Sample course documents.
- Exercises to use 8D tools and forms recommended by RM13000.